SICOMA Twin Shaft Concrete Mixers (Motor Top) - Sicoma Mixers - Badja Karya Technik Supplier Valves Fittings Engineering Spare Parts Surabaya Sicoma Mixers Indonesia Article

JSE series twin shaft SICOMA Concrete Mixers is very special; its motors are designed on the mixer top. And all spare parts are installed on the mixer drum, which makes maintenance space bigger, it is very convenient to install and renewal for the whole equipment. Its mixing arms are streamline both in axial and in radial, the material in trough not only is cut in radial but also is pushed in axial, so that it is mixed more turbulent and can reach the homogeneity in very short time. And this unique design also improves the utilization of cement. Its drive device is driven by two planetary gear boxes; it has the advantages of compact configuration, stabilized driving, low noise and long service life.

Features

1. Mixing Shaft Its mixing shaft. SICOMA Concrete Mixers is made from smithing alloy steel, with best torsion-bent intension.
2. Shaft Head Sealing. SICOMA Concrete Mixers Double floating seal rings and specially made seal parts and high pressure grease guarantee longer service life of shaft head seal and bearing.
3. Hydraulic Discharging Device. Hydraulic discharging can avoid some disadvantages of pneumatic discharging device like not opening discharging door because of low air pressure. When discharging door in half opened position, we can see the opening door device can be adjusted at a random angle. And if it is in emergency, we can open discharging door by pressing manual discharging knob.
4. Automatic Greasing System. Distributor SICOMA Concrete Mixers will distribute grease from point to point to all lubricated points to ensure its need. High grease pressure, bigger viscidity and lower failure rate of line clogging make longer working life of shaft sealing.